【MUST KNOW BEFORE BUYING】

● This product is suitable for repairing small dents, minor dents, and hail damage. Not suitable for corners, creases, and dents on thick sheet metal like large trucks.

● We suggest using hot-melt adhesive, as other adhesives may damage your car's paint. When removing the glue, we suggest spraying it with alcohol, then removing the hot-melt adhesive after letting it sit for a while to avoid damaging the car paint.

● Please use it in strict accordance with the instructions, otherwise the ideal repair effect will not be achieved.

Note:

If the original car paint has been repaired or damaged, this product cannot be used. This product does not damage the original paint during use.

Features:

100% brand new and high quality.

It is made of aluminum alloy for strong strength and long durability.

Used as an adapter for a slide hammer or pulling tap for easy catching and pulling.

A necessary component for dent repair, direct replacement for a broken one.

Easy installation, the thread size is M10 for better application.

Specification:

Material: aluminum alloy.

Color: as shown in the picture

Type: M10

【Note】

1. Kit 1 only contains an extractor and 18 blue tabs, excluding glue gun, glue stick, and other accessories.

2. If the operation is unsuccessful, please repeat it.

Package included:

【Kit 1: Extractor only without glue】

1 * extractor

18 * tabs

【Kit 2: Extractor with glue kits】

1 * extractor

18 * tabs

1*20W glue gun (US/EU plug)

5 * glue sticks (7mm/0.28 inches * 27cm/10.6 inches)

1 * shovels

1 * towel

1 * alcohol bottle (alcohol not included)

Usage steps:

1.Clean the surface with a clean, damp cloth.

2.Insert the glue stick into the gun, plug it in, and preheat for 5-10 minutes.

3.Choose the appropriate glue pulling tab based on the size of the dent, then apply the heated glue to the pulling tab. Immediately place the tab in the center of the dent and hold it until it adheres.

4.Let the glue cool for about 8-10 minutes. The cooling time should be less than 10 minutes and slightly shorter in winter.

5.Once the glue has cooled, align it with a golden dent lifter or bridge dent puller, and press the puller to lift the dent. Repeat the above steps until the dent disappears.

Material: aluminum + ABS plastic